SUS301L不锈钢板环焊结构焊孔形状优化分析
文敏飞,鲁连涛
(西南交通大学牵引动力国家重点实验室,四川成都610031
摘要应用网格划分软件Hyperworks和有限元分析软件ANSYS对三种不同焊孔形状的环焊结构试样进行强度和模态分析。通过强度分析结果,圆形孔试样的应力值最小;分别提取三种试样的前六阶固有频率和振型,通过模态分析得出圆形孔试样垂向振动固有频率略高,跑道形和正方形孔试样扭转振动固有频率略高。综合分析得出试样的最佳焊孔形状为圆形。
关键词焊;有限元;模态分析;优化分析
中图分类号TP391.77         文献标识码A           文章编号10060316 (2012) 06000104
Optimization analysis of different hole shapes on ring-weld structures of
 SUS301L
corrosion resistant plate
WEN Min-feiLU Lian-tao
(Traction Power State Key Laboratory, Southwest Jiaotong University, Chengdu 610031, China)
AbstractThree ring-weld structures of different hole shapes were analysed in strength and mode through the application of hyperworks and ansys. According to the results of the strength analysis, it can be drawn that circular hole specimen has the minimum stress value;the first six natural frequency and mode shapes of three specimens were extracted respectively, and it can be seen that the vertical vibration natural frequency of circular hole sample is slightly higher , torsional vibration natural frequency of the other two are slightly higher.It can be obtained comprehensively that the best hole shape of specimens is circular shape.
Key wordsring-weldFEmodal analysisoptimization analysis

———————————————
收稿日期:2012-02-10
基金项目:国家科技支撑计划项目(2009BAG12A01-B10-1)
作者简介:文敏飞(1985-),山东潍坊人,硕士研究生,主要研究方向为焊接结构疲劳。

 

设为首页  |  加入收藏    |   免责条款
《机械》杂志版权所有     Copyright©2008-2012 Jixiezazhi.com All Rights Reserved 

  电话:028-85925070    传真:028-85925073    E-mail:jixie@vip.163.com

地址:四川省成都锦江工业开发区墨香路48号   邮编:610063

Powered by PageAdmin CMS