双吸离心泵优化分析

 何智东1,刘雪垠2,宋冬梅2

(1.新达泵阀股份有限公司,四川 达州 635000;2.四川省机械研究设计院,四川 成都 610063)
摘要:通过对某双吸离心泵优化前后仿真建模,并对压力分布、速度分布情况进行流场仿真分析,对比测试,调整优化方案,达到预期效果。优化后进出口段阻力损失降低约13%,叶片的低压大幅提升,抗气蚀性能远远优于优化前,叶片速度超过20 m/s的区域很少,速度均匀度高,泵壳旋流涡左右对称,有利于转轮轴向力的平衡,测试效率提高6.3%,高效点向大流量偏移,高效区变宽,为同类型双吸离心泵的优化提供了一定参考。
关键词:双吸离心泵;仿真分析;抗气蚀性能
中图分类号:TP391.9     文献标志码:A doi:10.3969/j.issn.1006-0316.2018.08.006
文章编号:1006-0316 (2018) 08-0026-04
Optimization Analysis of Double Suction Pump
HE Zhidong1,LIU Xueyin2,SONG Dongmei2
( 1.XinDa Pump & Valve Co., Ltd., Dazhou 635000, China; 2.Sichuan Machinery Research & Design Institute, Chengdu 610063, China )
Abstract:Numerical simulation of the double-suction centrifugal pump was carried out after building 3D models of the improved and the former one. Desired results were achieved by contrast testing and adjusting optimization scheme. After optimization, the resistance loss of inlet and outlet section is reduced by about 13%, the low pressure of blade is greatly improved, and the anti-cavitation performance is far superior to that before optimization. The area of blade velocity exceeding 20 m/s is few, the velocity uniformity is high, the swirl vortex of pump shell is symmetrical, which is beneficial to the balance of axial force of runner. The test efficiency is increased by 6.3%, and the high efficiency point is deviated to large flow rate,the high efficiency zone is wide, which provides a reference for the optimization of the same type double suction centrifugal pump. 
Key words:double suction centrifugal pump;simulation analysis;anti-cavitation performance
———————————————
收稿日期:2017-09-25
作者简介:何智东(1973-),男,四川达州人,工程师,主要从事水泵设计、制造工作。
 

 

设为首页  |  加入收藏    |   免责条款
《机械》杂志版权所有     Copyright©2008-2012 Jixiezazhi.com All Rights Reserved 

  电话:028-85925070    传真:028-85925073    E-mail:jixie@vip.163.com

地址:四川省成都锦江工业开发区墨香路48号   邮编:610063

Powered by PageAdmin CMS