机械设备摩擦磨损标准铁谱图谱分析技术研究

 姚春江1,陈小虎1,阳能军1,幕连好2,袁晓静1

(1.火箭军工程大学 作战保障学院,陕西 西安 710025;2.火箭军驻济南地区军事代表室,山东 济南 250010)
摘要:针对铁谱分析图谱识别与诊断困难的问题,运用长期积累的知识和铁谱图,根据机械设备摩擦磨损的规律、形式与磨损程度,对铁谱图形进行分类分级,形成了正常、切削、滑动、疲劳和复合五大磨损磨粒。对各类磨损磨粒进行分级,定义各类各级铁谱磨粒的特征,形成了标准铁谱分析图,为铁谱图的可靠分析提供重要的参考。
关键词:铁谱分析;摩擦磨损;铁谱图
中图分类号:TH117.1 文献标志码:A doi:10.3969/j.issn.1006-0316.2018.07.015
文章编号:1006-0316 (2018) 07-0063-05
Research on Standard Ferrography Atlas Analysis Technology for Friction and Wear of Mechanical Equipment
YAO Chunjiang1,CHEN Xiaohu1,YAN Nengjun1,MU Lianhao2,YUAN Xiaojing1
( 1.Combat Support College, Rocket Force University of Engineering, Xi’an 710025, China; 2.Military Representative Office of Rocket Army in Ji’nan, Ji’nan 250010, China )
Abstract:In order to solve the identification and diagnosis difficulty of ferrography analysis atlas, Classification and classification of Ferrography are established by using knowledge and long-term accumulation of iron ferrography, and according to the regularity, form and wear degree of friction and wear of mechanical equipment. Five wear debris are formed, including normal wear, cutting wear, sliding wear, fatigue wear and composite wear, The classification of various wear debris is carried out, and the various levels characteristics are defined, and a standard ferrography analysis atlas is formed. This provides an important reference for the reliable analysis of ferrography.
Key words:ferrography analysis;friction and wear;ferrography atlas
———————————————
收稿日期:2018-02-02
作者简介:姚春江(1979-),男,浙江嵊州人,博士,讲师,主要研究方向为装备维修保障。
 

 

设为首页  |  加入收藏    |   免责条款
《机械》杂志版权所有     Copyright©2008-2012 Jixiezazhi.com All Rights Reserved 

  电话:028-85925070    传真:028-85925073    E-mail:jixie@vip.163.com

地址:四川省成都锦江工业开发区墨香路48号   邮编:610063

Powered by PageAdmin CMS