轴承外圈加工自动上下料机构设计

 田国富1,左嘉翼1,刘娅菲2

(1.沈阳工业大学 机械工程学院,辽宁 沈阳 110870;2.中国航发贵州红林航空动力控制科技有限公司,贵州 贵阳 550025)
摘要:根据轴承外圈的结构特点以及对其加工工艺进行研究,利用步进电机优秀的起停和反转响应、定位精度及可靠性较高等优点,设计了轴承外圈锻压自动上下料机构,计算出该自动上下料机构主要零件结构,并对其校核。该机构解决了轴承外圈锻压时由人工上下料产生的安全隐患,同时对提高产品质量、生产效率及降低工人的劳动强度都起到了很好的作用。
关键词:轴承;步进电机;自动上下料机构;生产效率
中图分类号:TH122 文献标志码:A doi:10.3969/j.issn.1006-0316.2018.07.008
文章编号:1006-0316 (2018) 07-0032-04
Design of Automatic Feeding Mechanism for Bearing Outer Ring Processing
TIAN Guofu1,ZUO Jiayi1,LIU Yafei2
( 1.School of Mechanical Engineering, Shenyang University of Technology, Shenyang 110870, China; 2.AECC Guizhou Red Forest Aviation Power Control Technology Co., Ltd., Guiyang 550025, China )
Abstract:According to the structural characteristics of the bearing outer ring and its processing technology research. The use of stepping motor excellent start and stop and reverse response, positioning accuracy and high reliability advantages, design of the bearing outer ring forging automatic feeding agencies.The structure of the main parts of the automatic feeding mechanism is calculated and checked at the same time.The mechanism to solve the bearing outer ring forging by manpower arising from the potential safety problems, while improving product quality, production efficiency and reduce the labor intensity of workers have played a very good role.
Key words:bearing;stepper motor;automatic feeding mechanism;production efficiency
———————————————
收稿日期:2017-12-19
基金项目:辽宁省自然科学基金资助项目(20170540674)
作者简介:田国富(1968-),男,吉林长春人,博士,教授,主要研究方向为机械系统的CAD/CAE技术、工程车辆设计与试验、智能算法应用等;左嘉翼(1992-),男,辽宁沈阳人,硕士研究生,主要研究方向为机械工程。
 

 

设为首页  |  加入收藏    |   免责条款
《机械》杂志版权所有     Copyright©2008-2012 Jixiezazhi.com All Rights Reserved 

  电话:028-85925070    传真:028-85925073    E-mail:jixie@vip.163.com

地址:四川省成都锦江工业开发区墨香路48号   邮编:610063

Powered by PageAdmin CMS