切割型双叶片潜污泵设计和数值模拟
宋冬梅1,薛波2,刘雪垠1,曾梦玮1,戴莉斯1
(1.四川省机械研究设计院,四川 成都 610063;2.方圆标志认证集团四川有限公司,四川 成都 610014)
摘要:为解决污水处理用排污泵叶轮易堵塞、效率低等问题,设计了一种新型切割型双叶片潜污泵。分析叶轮特点,提出叶轮水力设计方法,并对泵进行了全流道数值模拟,得出了叶轮内压力、湍动能、流线分布等情况,从而分析出该泵内部流动的特点和通过能力提高的原因。基于性能预测方法对规定工况点的性能进行预测,验证设计方法的可行性。
关键词:潜污泵;前伸式双叶片;数值模拟;性能预测
中图分类号:TH311 文献标志码:A doi:10.3969/j.issn.1006-0316.2018.05.017
文章编号:1006-0316 (2018) 05-0064-04
Design and Numerical Simulation of Cutting Type Double Blades Sewage Pump 
SONG Dongmei1,XUE Bo2,LIU Xueyin1,ZENG Mengwei1,DAI Lisi1
( 1.Sichuang Provincial Machinery Research & Design Institute, Chengdu 610063, China;
2.China Quality Mark Certification Group Sichuan Co., Ltd., Chengdu 610014, China )
Abstract:In order to solve the problem of easy plugging and poor efficiency of the sewage pump, this paper designs a new type of cutting type double blades submersible sewage pump. This paper analyzes the characteristics of the pump impeller, puts forward the hydraulic design method of impeller, and the full flow numerical simulation of the design of the cutting type double blades submersible sewage pump is carried out, pressure, turbulent kinetic energy and streamline distribution in the impeller are obtained, and the characteristics of the internal flow of the pump and the reasons for the improvement of the passing capacity are analyzed. Based on the performance prediction method, the performance of the specified operating point is forecasted, the feasibility of the design method is validated.
Key words:submersible sewage pump;cutting type double blades;numerical simulation;performance forecast
———————————————
收稿日期:2017-12-26
作者简介:宋冬梅(1986-),女,四川犍为人,硕士研究生,工程师,主要从事流体机械数字化设计理论与制造技术工作。
 

 

设为首页  |  加入收藏    |   免责条款
《机械》杂志版权所有     Copyright©2008-2012 Jixiezazhi.com All Rights Reserved 

  电话:028-85925070    传真:028-85925073    E-mail:jixie@vip.163.com

地址:四川省成都锦江工业开发区墨香路48号   邮编:610063

Powered by PageAdmin CMS