基于国家标准的某乘用车视野理论分析

 王国锋,田国富

(沈阳工业大学 机械工程学院,辽宁 沈阳110087)
摘要:为了验证驾驶员位置布置的合理性,避免设计后期修改的不便性,根据国家最新修订的GB11562-2014和GGB11562-2014的驾驶员视野法规,在不借助任何视野模拟软件帮助的前提下,只使用Catia制图软件按照国家法规要求作图分别对驾驶员前、后、内、外视野进行了计算和分析。由此得出的风窗玻璃基准点、A柱障碍角、驾驶员180°视野等条件均满足国家法规的要求。避免了布置人员使用不同分析标准得出的不同结论引起争议的情况,从而使分析和验证的结果更加具有说服力。
关键词:驾驶员视野;汽车视野安全;GB 11562-2014;GB 11562-2014;Catia
中图分类号:R770.42+2 文献标志码:A doi:10.3969/j.issn.1006-0316.2018.04.013
文章编号:1006-0316 (2018) 04-0056-05
Theoretical Analysis of the Vision of the Vehicle Based on National Standard
WANG Guofeng,TIAN Guofu
( School of Mechanical Engineering, Shenyang University of Technology, Shenyang 110087, China )
Abstract:In the early stage of the design, the general layout of vehicle occupants need to be analyzed for the car models. When the models meet the requirements of strength, it should also meet the requirements of ergonomics including requirements for the driver's vision. According to the latest revision of the regulations—— GB-11562-2014 and GB-15084-2013, the driver's front, rear, internal and external vision was calculated and analyzed without the aid of any visual simulation software, so as to avoid controversial conclusions drawn from different analytical standards, which verify the rationalityof the general layout.
Key words:driver's field of view;safety of Automobile Visibility;GB11562-2014;GB11562-2014;Catia
———————————————
收稿日期:2017-08-04
基金项目:辽宁省科技计划项目(20170540674)
作者简介:王国锋(1993-),男,河北省人,硕士研究生,主要研究方向为车辆工程;田国富(1968-),男,吉林长春人,博士研究生,教授,主要研究方向为车辆工程。
 

 

设为首页  |  加入收藏    |   免责条款
《机械》杂志版权所有     Copyright©2008-2012 Jixiezazhi.com All Rights Reserved 

  电话:028-85925070    传真:028-85925073    E-mail:jixie@vip.163.com

地址:四川省成都锦江工业开发区墨香路48号   邮编:610063

Powered by PageAdmin CMS