汽车门内板嵌饰板机械热压复合工艺开发

 高绍芊,马强祥,万利焱

(上海延锋金桥汽车饰件系统有限公司,上海 200233)
摘要:在目前的汽车内饰件制造中,包覆类饰板常规采用生产效率低的手工包覆来完成。基于某V项目门内饰总成嵌饰板零件国产化,对嵌饰板零件的材料、产品结构及要求等方面的制造工艺可行性进行了前期开发验证,包括表皮缝纫线精确定位、热熔胶的喷涂、嵌饰板骨架的加热方式以及热压复合设备的选择方案等,实现机械复合代替手工包覆,并达到提高生产效率的目的。
关键词:3D缝纫线;热熔胶;热压复合;旋转模架;嵌饰板
中图分类号:U466 文献标志码:A doi:10.3969/j.issn.1006-0316.2018.03.017
文章编号:1006-0316 (2018) 03-0066-03
Vehicle Inner Door Trim Insert Panel Mechnical Laminating and Wapping Developing
GAO Shaoqian,MA Qiangxiang,WAN Liyan
( Shanghai Yangfeng Jinqiao Automotive Trim Systems Co., Ltd., Shanghai 200233, China )
Abstract:Manual wrapping is always chosen as the process for Vehicle Interior deco panel wrapping. Based on the Door Trim Insert developing in V program, this subject tried and analyzed the manufacturing feasibility of Door Trim Insert Part material, structure on mechanical wrapping, including precisely locating of sewed skin, spray of hot melt, heating method choosing, laminating machine choosing, etc, and finally achieve the mechanical laminating and wrapping, and raised manufacturing efficiency.
Key words:3D Sewing;hot melt;hot press laminating;rotating fixture
———————————————
收稿日期:2017-08-08
作者简介:高绍芊(1965-),男,河北玉田人,本科,技术中心工程部经理,主要从事汽车内饰件设计和开发工作。
 

 

设为首页  |  加入收藏    |   免责条款
《机械》杂志版权所有     Copyright©2008-2012 Jixiezazhi.com All Rights Reserved 

  电话:028-85925070    传真:028-85925073    E-mail:jixie@vip.163.com

地址:四川省成都锦江工业开发区墨香路48号   邮编:610063

Powered by PageAdmin CMS