某船用高压油泵壳体的动态特性分析

 李玉光1,魏镇1,朱宇龙1,郑石兵2,张鹏2

(1.大连大学 机械工程学院,辽宁 大连 116622;2.船舶与海洋工程动力系统国家工程实验室,重庆 402160)
摘要:船用高压油泵作为发动机的一部分,目前对其动态特性研究较少。采用有限元求解的方法对船用高压油泵壳体的动态特性进行研究。利用Pro/E软件建立了高压油泵壳体三维模型,利用ABAQUS软件建立其有限元模型,并在ABAQUS中求解了高压油泵壳体的前三十阶模态振型及其表面振动响应,并得到了高压油泵壳体的当量振动烈度,为后续辐射噪声计算及结构改进提供了参考依据。
关键词:高压油泵;壳体;模态分析;振动响应
中图分类号:U664.124 文献标志码:A doi:10.3969/j.issn.1006-0316.2018.03.014
文章编号:1006-0316 (2018) 03-0053-04
Dynamic Characteristics Analysis of a High Pressure Oil Pump Shell
LI Yuguang1,WEI Zhen1,ZHU Yulong1,ZHENG Shibin2,ZHANG Peng2
( 1.College of Mechanical Engineering, Dalian University, Dalian 116622, China;
2.National Engineering Laboratory for Ship and Marine Engineering Power Systems, Chongqing 402160, China)
Abstract:Marine high pressure oil pump as a part of the engine, the dynamic characteristics of the research method in this paper by using the finite element solution was used to study the dynamic characteristics of high pressure oil pump shell on the ship. A high pressure oil pump shell three-dimensional model using Pro/E software, establish the finite element model by Abaqus software, and in Abaqus solution high pressure pump casing thirty mode and the surface vibration response, and obtained the equivalent vibration intensity of the high-pressure oil pump shell, as a reference for the subsequent radiation noise and improvement of structure.
Key words:high pressure oil pump;shell;modal analysis;vibratory response
———————————————
收稿日期:2017-10-25
作者简介:李玉光(1963-),男,辽宁大连人,博士,教授,主要研究方向为机械设计。
 

 

设为首页  |  加入收藏    |   免责条款
《机械》杂志版权所有     Copyright©2008-2012 Jixiezazhi.com All Rights Reserved 

  电话:028-85925070    传真:028-85925073    E-mail:jixie@vip.163.com

地址:四川省成都锦江工业开发区墨香路48号   邮编:610063

Powered by PageAdmin CMS