钢筋笼液压自动支撑装置研究

 王德民,刘荣帅,吴红刚,王鹏宇

(长春理工大学 机电工程学院,吉林 长春 130022)
摘要:针对传统钢筋笼支撑装置存在的工作效率低、自动化程度低等问题,设计了新型液压自动支撑装置,并详细介绍液压支撑的原理。通过CATIA软件建立三维模型,然后利用有限元分析软件Workbench对支撑装置进行特征值屈曲分析,采用Block Lanczos方法求出它的屈曲特征值以及特征值屈曲模态。分析结果表明,支撑装置的强度满足要求,不会发生屈曲现象。
关键词:支撑装置;Workbench;特征值;屈曲分析
中图分类号:TU312 文献标志码:A doi:10.3969/j.issn.1006-0316.2018.03.006
文章编号:1006-0316 (2018) 03-0023-04
Research on Hydraulic Automatic Support Device of Steel Reinforcement Cage
WANG Demin,LIU Rongshuai,WU Honggang,WANG Pengyu
( College of Mechanical and Electric Engineering, Changchun University of Science and Technology, Changchun 130022, China )
Abstract:In view of the low efficiency and automation of the traditional support device in steel cage, a new type of hydraulic automatic support device is designed, and the principle of hydraulic support is introduced in detail. The 3D model is established by CATIA, then the eigen value buckling analysis of the support device is performed by using the finite element analysis software Workbench, and calculate the buckling characteristics and the eigen value buckling mode by using Block Lanczos method. The analysis results show that the strength of the support device can meet the requirement and the buckling will not happen. 
Key words:support device;Workbench;eigen value;buckling analysis
———————————————
收稿日期:2017-06-21
作者简介:王德民(1961-),男,辽宁西丰人,本科,副研究员、硕士研究生导师,主要研究方向为机电系统控制与技术。
 

 

设为首页  |  加入收藏    |   免责条款
《机械》杂志版权所有     Copyright©2008-2012 Jixiezazhi.com All Rights Reserved 

  电话:028-85925070    传真:028-85925073    E-mail:jixie@vip.163.com

地址:四川省成都锦江工业开发区墨香路48号   邮编:610063

Powered by PageAdmin CMS